A Guest Post by Mia Johnstone.
Learning some very simple fill flash tips will help elevate the quality of your photographs. This tutorial will teach you to fill in shadows and help create more professional looking portraits. These tips can be applied to shooting indoors with window light and can also be great for shooting outdoors in open shade (no direct sunlight).
- A DSLR camera
- Basic working knowledge of manual mode
- An off camera flash with variable light output (you can get basic ones for $100)
- An optional filter for your flash (softens light).
2. Depending on how strong the window lighting is, your ISO should be at around 100 or 200. I usually shoot at an aperture of 3 or 3.5. Then set your shutter speed appropriately, but not faster than 1/250. My settings=ISO 100, aperture 3.5, 1/125 speed.
3. Set your flash to manual mode and your variable light output to 1/34. If you are using a filter on your flash, your flash head should be at a 45 degree angle, if possible. Take a test shot. If I am only a few feet away from my subject, this is usually too bright. I love 1/64 or 1/128 light output from a flash. It gives that extra splash of light to help fill in the shadows.
Taking a good portrait is very simple. The portrait above with no flash isn’t a bad image. But when you add some flash, it gives the model and photo a whole new dimension. You can use these simple tips when you take wedding photographs, at the beach on cloudy days, or when you just want to give your photos some extra life.
Simple Fill Flash Tips: Disclaimer